How to Find Hidden Piping and Valves

If you are a homeowner then you need to know the details of your home like the back of your hand. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. Below are some of the ways that you can be able to find out where the various valves are located.

There is a high probability that the the gas valves for your home will be located before the gas meter in case you have natural gas. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. A second valve is usually located further down the line or where the gas pipe first enters.

There are high chances that the gas pipes you have are made from flexible copper if you own a modern home and the valves are most likely to be located in the utility room. When you have such a piping system you are usually sure that the gas system that you have usually has a high pressure. The shutoff valves of such systems are usually located near the water heater or the furnace.

When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. Should you be in an environment where it gets really cold then the shut off points is most likely to be located inside the home to prevent things like freezing. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.

Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. When you look at the report, you are sure that you will be able to find out where the valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.

With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. By using a metal detector, you are sure that you will be able to find such valves since they are usually made up of metals. If you use a plan to find the valves then you are sure that you are able to easily know where to start.

Suggested Article: use this link